FilmTec™ Fortilife™ CR200 Element

Key Features:

• Enables up to 10% higher productivity relative to FilmTecTM FortilifeTM CR100 element.

• Ultra-low pressure drop element design to help provide.

• Robust, fouling resistant membrane and module design delivering up to 50% reduction in the number

   Of cleanings caused by biological fouling.

• Durable membrane that withstands cleaning over a wide pH range (from pH 1 to pH 13) for a long

   Service life of an element and cost-effective maintenance.

Key Application:

• Industrial and Municipal Wastewater reuse such as in textiles, steel & metals, chemical &

   Petrochemical.

• Demineralization for industrial utility water with challenging feed water.

Typical Properties:

lmTecTM FortilifeTM               Active Area                    Feed Spacer                        Permeate Flow                  

 CR200 element                      ft2 (m2)                      Thickness (mil)                     Rate gpd (m3/d)                                                                                                            

                                                400 (37)                            34                                    12,500 (47.3)

Stabilized Salt                      Minimum Salt

Rejection (%)                       Rejection (%)

       99.7                                     99.4

Membrane Type                                                                Polyamide Thin-Film Composite

Maximum Operating Temperature1                                  113°F (45°C)

Maximum Operating Pressure                                           600 psig (41 bar)

Maximum Pressure Drop Per Element                              15 psig (1.0 bar)

Per Pressure Vessel (Minimum 4 Elements)                       50 psig (3.5 bar)   

pH Range Continuous Operation1                                    2-11

Short-Term Cleaning (30 min.)2                                        1-13

Maximum Feed Flow3                                                       75 gpm (17m3/hr)

Maximum Feed Silt Density index                                     SDI 5

Free Chlorine Tolerance5                                                  <0.1ppm

                                                       Length                                                Diameter            

lmTecTM FortilifeTM                  (in.)           (mm)                                  (in.)           (mm)              

 CR200 element                       40.0          1,016                                  7.9             201